IEI Technology TRN-TABLET3, Руководство пользователя

Страница: 49 / 71

TRN-TABLET3
Page 39
4.6 Boot
Use the Boot menu (
439H522H 820H
BIOS Menu 16 ) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot [Enabled]
Boot Option Priorities
Boot Option #1 [PO:M.2 (S80) 3MG-P]
Launch PXE OpROM
[Disabled]
Option ROM Messages [Force BIOS]
UEFI Boot [Enabled]
Hard Drive BBS Priorities
Select the keyboard
NumLock state
---------------------

: Select Screen
 
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 16: Boot
 Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On D
EFAULT
Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.

Off Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.