IEI Technology tKINO-AL, Руководство пользователя

Страница: 77 / 136

tKINO-AL SBC
Page 63
4.7.6 M.2 and SATA2 Select Switch
Use the M.2 and SATA2 select switch (J_SATA1) to set the priority of M2_1 and SATA2
connectors since the M.2 (M2_1) slot is co-lay with the SATA2 connector. The M.2 and
SATA2 select switch settings are shown in Table 4-5 .
Setting Description
Short A-B
M.2 as the priority (Default)
(SATA2 will be disabled if an M.2 module is
installed in the M2_1 slot.)
Short B-C M2_1 is enabled and SATA2 is disabled.
Table 4-5: M.2 and SATA2 Select Switch Settings
The location of the M.2 and SATA2 select switch is shown in Figure 4-20 below.
Figure 4-20: M.2 and SATA2 Select Switch Location