IEI Technology TANK-871-Q170i Series, Руководство пользователя

Страница: 33 / 130

TANK-871-Q170i Embedded System
Page 19
Step 5: Install the new DDR4 memory module by pushing it into the socket at an angle
( Figure 3-5 ).
Step 6: Gently pull the spring retainer clips of the SO-DIMM socket out and push the
rear of the DDR4 memory module down ( Figure 3-5 ).
Step 7: Release the spring retainer clips on the SO-DIMM socket. They clip into place
and secure the DDR4 memory module in the socket.
Figure 3-5: DDR4 SO-DIMM Module Installation
Step 8: Reinstall the bottom panel to the TANK-871-Q170i series.
CAUTION:
For dual channel configuration, always install two identical memory
modules that feature the same capacity, timings, voltage, number of
ranks and the same brand.
3.4 Mounting the System with Mounting Brackets
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
Step 1: Turn the embedded system to the bottom panel.
Step 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the bottom panel ( Figure 3-6 ).