IEI Technology TANK-870e-H110 Series, Руководство пользователя

Страница: 32 / 110

TANK-870e-H110 Embedded System
Page 20
Step 7: Reinstall the fan bracket cover to the system and tighten the thumbscrew on the
rear panel.
3.4 Mounting the System with Mounting Brackets
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
Step 1: Turn the embedded system to the left side panel.
Step 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the bottom surface or the left side panel ( Figure 3-9 ).
Left Side Panel
Figure 3-9: Mounting Bracket Retention Screws
Step 3: Secure the brackets to the system by inserting two retention screws into each
bracket ( Figure 3-9 ).
Step 4: Drill holes in the intended installation surface.
Step 5: Align the mounting holes in the sides of the mounting brackets with the predrilled
holes in the mounting surface.
Step 6: Insert four retention screws, two in each bracket, to secure the system to the
wall.