manualshive.com logo in svg

IEI Technology SRM-KIT Series, Руководство пользователя

Поделиться
Скачать
IEI Technology SRM-KIT Series Скачать руководство пользователя страница 70

 

SRM-KIT Series LCD Monitor 

 

Light Enable 

ON/OFF 

Turn on or turn off auto-dimming function. When auto-dimming 

is turned on, the auto-dimming LED on the OSD panel is on 

and the monitor automatically adjusts the brightness according

to ambient light conditions. 

 

Light Max   

Adjusts the maximum LCD brightness value. The value is from 

0% to 100%. The value cannot be smaller than the minimum 

LCD brightness value.   

 

Light Min   

Adjusts the minimum LCD brightness value. The value is 

among 0% to 100%. The value cannot be larger than the 

maximum LCD brightness value. 

 

LUX Max 

Adjusts the maximum LUX. The value is from 0 to 400 (40,000 

LUX). The value cannot be smaller than the minimum LUX. 

 

LUX Min 

Adjusts the minimum LUX. The value is from 0 to 400 (40,000 

LUX). The value cannot be larger than the maximum LUX. 

5.2.6.3 Changing the Default Settings 

The maximum and minimum LUX value and backlight brightness in the OSD panel can be 

adjusted to meet custom needs and lighting conditions. 

 NOTE: 

When the auto dimming function is on, the “Brightness Control” 

 in 

main display feature (refer to 

Section 5.2.1

) is not effective. The user can 

only adjust the maximum and minimum value of the LUX and backlight to 

make the LCD brighter or darker.   

 

 

 

Page 56 

Содержание SRM-KIT Series














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды