IEI Technology ROCKY-6160, Руководство пользователя

Страница: 59 / 59

57
Appendix E. How to use Wake-
Up Function
ROCKY-6160 supports two kind of Wake-up Function.
This page describes how to use Modem Wake-Up and LAN
Wake-Up function. Wake-Up function is only working when you
use ATX power supply.
Wake–Up On Modem (Ring):
You must set the option “ Wake-Up On LAN/Ring ” in
CMOS SETUP to be enabled. The ATX power supply will be
switched on when there is a ring signal detected on pin “RI” of
serial port.
Wake-Up On LAN :
When your computer is in power-down status, you can see
LAN Link/Active LED is flashing. This indicates that the LAN chip
has entered standby mode and waits for Wake-Up signal. You
can use other computers to wake up your computer by sending
an ID to it via LAN.
ID: ID is the address of your system LAN. Every LAN chip has a
factory-set ID, which you can find it from network information
in WINDOWS.
ID’s format is xxxxxxxxxxxx
Example ID : 009027388320