IEI Technology ROCKY-6160, Руководство пользователя

Страница: 34 / 59

32
Enables or disables the LBA mode. Setting to Auto enables the
LBA mode if the device supports this mode, and if the device
was not previously formatted with LBA mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to
Auto, the data transfer from and to the device occurs multiple
sectors at a time if the device supports multi-sector transfer
feature. When set to Disabled, the data transfer from and to
the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
Hard Disk Write protect [Disabled]
This item allows you to enable or disable the hard disk write
protect.
Configuration options: [Disabled] [Enabled]
IDE Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
ATA(PI) 80Pin Cable Detection [Host & Device]
Configuration options: [Host & Device] [Host] [Device]
4.7.3 Floppy Configuration
Sets the type of floppy drive installed.
Configuration options: [Disabled][360K, 5.25 in.][1.2M ,
5.25 in.][720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M,3.5in.]