IEI Technology PUZZLE-IN005, Руководство пользователя

Страница: 34 / 106

PUZZLE-IN005
Page 34
3.10 Rack Mount
The PUZZLE-IN005 is shipped with two rack mount brackets that could be used to secure
the system to the rack after mounting it with the optional sliding rails. To install the
PUZZLE-IN005 into a rack, please follow the steps below.
WARNING:
The provided rack mount brackets must be used with sliding rails. Using
only the rack mount brackets to mount the system on a rack may cause
damage to the system.
Step 1: Install the rack mount brackets to the sides of the PUZZLE-IN005 by inserting
four provided retention screws into each bracket ( Figure 3-12 ). Make sure the
screws are tight and on the right positions.
Figure 3-12: Rack Mount Bracket Installation
Step 2: Install a handle on each rack mount bracket. To do this, align the end of the
handle with the screw hole on the rack mount bracket, and secure it with two
retention screws as shown below.