IEI Technology PUZZLE-IN004 Series, Руководство пользователя

Страница: 73 / 102

PUZZLE-IN004
Page 63
4.7 Boot
Use the Boot menu ( BIOS Menu 18 ) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2019 American Megatrends, Inc.
Main Advanced Platform Configuration Socket Configuration Security Boot
Boot Configuration
Bootup NumLock State [On]
Launch PXE OpROM [Disabled]
UEFI Boot [Disabled]
Quiet Boot [Enabled]
Boot Option Priorities
Boot Option #1 [sSATA P4: 240GB...]
Boot Option #2 [sSATA P4: 240GB...]
Hard Drive BBS Priorities
Select the keyboard
NumLock state
---------------------

: Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C) 2019 American Megatrends, Inc.
BIOS Menu 18: Boot

Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On D
EFAULT
Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.

Off Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.