IEI Technology PPC-37 A-N26 Series Скачать руководство пользователя страница 107

Страница: 107 / 200

PPC-37xxA-N26 Panel PC

Page 91

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset

VGA

LAN

Audio

USB

3.0

Touchscreen

Installation instructions for the drivers are given in the following sections.

6.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD that came with the system into an optical disk drive connected to

the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->Computer->CD Drive->autorun.exe"

Step 2:

The list of drivers in

Figure 6-1

appears.

Содержание PPC-37 A-N26 Series









































































































































































































Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы:

IEI Technology PPC-37 A-N26 Series, Руководство пользователя, Страница: 107 / 200

Результаты поиска

Содержание PPC-37 A-N26 Series

Отзывы: