IEI Technology PPC-2706, Руководство пользователя

Страница: 48 / 124

PPC-2706/PPC-2708 Panel PC
Page 38
Step 2:
Locate the SO-DIMM socket on the motherboard of the flat panel PC.
Step 3:
Push the SO-DIMM chip into the socket at an angle. (See
Figure 3-23
)
Step 4:
Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM module down. (See
Figure 3-23
)
Step 5:
Release the arms on the SO-DIMM socket. They clip into place and secure the
SO-DIMM module in the socket.
Step 0:
Figure 3-23: SO-DIMM Module Installation
3.11 SATA - ALi RAID Driver Installation
CAUTION!
Because of the inherent limitations by AMD Geode CS5536 chipset, the ALi
M5283 SATA and RAID controller is implemented as a device that requires
device driver during the Windows installation process. To successfully
install the device driver, please carefully read the following instructions.
The ALi driver is especially required if SATA drives are the only hard disk drives in the
PPC-2706/PPC-2708 system. Otherwise, the Windows installation program may fail to
locate the hard drives whether configuring the SATA disk drives into RAID volumes or
using them as individual disk drives.