IEI Technology PM-LX2-800 Скачать руководство пользователя страница 91

Страница: 91 / 123

PM-LX2-800 User Manual

Page 91

USB Configuration

The

USB Configuration

field shows the system USB configuration. The items listed are:

Module Version: x.xxxxx.xxxxx

USB Devices Enabled

The

USB Devices Enabled

field lists the USB devices that are enabled on the system

USB 1.1 Controller [Enabled]

Use the

USB Function

BIOS option to enable or disable USB function support.

Disabled

USB 1.1 controller disabled

Enabled D

EFAULT

USB 1.1 controller enabled

USB 2.0 Controller [Enabled]

Use the

USB 2.0 Controller

BIOS option to enable or disable the USB 2.0 controller

Disabled

USB 2.0 controller disabled

Enabled D

EFAULT

USB 2.0 controller enabled

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Содержание PM-LX2-800




























































































































Результаты поиска

Содержание PM-LX2-800

Отзывы:

IEI Technology PM-LX2-800, Руководство пользователя, Страница: 91 / 123

Результаты поиска

Содержание PM-LX2-800

Отзывы: