IEI Technology PM-LX2-800, Руководство пользователя

Страница: 62 / 123

PM-LX2-800 User Manual
Page 62
Step 4: Attach PS/2 connectors to the chassis . The keyboard/mouse Y-cable
connector is connected to two PS/2 connectors. To secure the PS/2 connectors
to the chassis please refer to the installation instructions that came with the
chassis.
Step 5: Connect the keyboard and mouse . Once the PS/2 connectors are connected
to the chassis, a keyboard and mouse can each be connected to one of the
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are
both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector. Step 0:
4.8.3 Parallel Port Cable without Bracket
The optional parallel port (LPT) cable respectively connects the onboard LPT 26-pin box
header to an external LPT device (like a printer). The cable comprises a 26-pin female
header, to be connected to the onboard LPT box-header, on one side and on the other
side a standard external LPT connector. To connect the LPT cable, please follow the
steps below.
Step 1: Locate the connector . The LPT connector location is shown in Section 3.1.1 .
Step 2: Align the connectors . Correctly align pin 1 on the cable connector with pin 1 on
the PCIE-9452 LPT box-header connector. See Figure 4-6 .
Step 3: Insert the cable connectors . Once the cable connector is properly aligned with
the 26-pin box-header connector on the PCIE-9452, connect the cable
connector to the onboard connector. See Figure 4-6.