IEI Technology PCIE-Q470 Скачать руководство пользователя

Страница: 3 / 90

PCIE-Q470 Full-size PICMG 1.3 CPU Card

Page 3

Copyright

COPYRIGHT NOTICE

The information in this document is subject to change without prior notice in order to

improve reliability, design and function and does not represent a commitment on the part

of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic, or other

means in any form without prior written permission of the manufacturer.

TRADEMARKS

All registered trademarks and product names mentioned herein are used for identification

purposes only and may be trademarks and/or registered trademarks of their respective

owners.

Содержание PCIE-Q470



























































































Результаты поиска

Содержание PCIE-Q470

Отзывы:

Похожие инструкции для PCIE-Q470

Бренды по названию

Популярные бренды

IEI Technology PCIE-Q470, Руководство пользователя

Результаты поиска

Содержание PCIE-Q470

Отзывы:

Похожие инструкции для PCIE-Q470

Бренды по названию

Популярные бренды