IEI Technology NOVA-300, Руководство пользователя

Страница: 14 / 27

14
Connection
This chapter describes how to connect peripherals, switches and
indicators to the NOVA-300 board. You can access most of the
connectors from the top of the board while it is installed in the
chassis.
3.1 Floppy Disk Drive Connector
NOVA-300 board comes equipped with a 34-pin daisy-chain
driver connector cable. The detailed pin assignment of the
connector is specified as following table:
•
CN5 : FDC CONNECTOR
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GROUND 2 REDUCE WRITE
CURRENT#
3 GROUND 4 N/C
5 GROUND 6 N/C
7 GROUND 8 INDEX#
9 GROUND 10 MOTOR ENABLE A#
11 GROUND 12 DRIVE SELECT B#
13 GROUND 14 DRIVE SELECT A#
15 GROUND 16 MOTOR ENABLE B#
17 GROUND 18 DIRECTION#
19 GROUND 20 STEP#
21 GROUND 22 WRITE DATA#
23 GROUND 24 WRITE GATE#
25 GROUND 26 TRACK 0#
27 GROUND 28 WRITE PROTECT#
29 GROUND 30 READ DATA#
31 GROUND 32 SIDE 1 SELECT#
33 GROUND 34 DISK CHANGE#
3.2 IDE Disk Drive Connector
You can attach two IDE( Integrated Device Electronics) hard
disk drives to the NOVA-300 internal controller. The board
comes equipped with a 40-pin flat-cable connector. The detailed
pin assignment of the connector is specified as following table: