NAS-4300S NETWORK ATTACHED STORAGE SERVICE MANUAL
Chapter 9
FACTORY DEFAULT SETUP
Overview
Create Disk Volume
Create Network Share
lear Event Logs
C
Overview
When a system is equipped with the hard drives and about to be shipped out, be
sure to perform below checks:
Pre-configure all the hard drives on the system to a RAID-0 volume.
Clear Event Logs
Remove all the event records.
Before performing the factory default setup, start the browser and open the
Create Disk Volume
Create Network Share
Create a default public share folder as mentioned in the user’s manual.
system administration web page of the network attached storage server.
Create Disk Volume
Foll w below steps to configure the default disk volume:
o
1.
In system administration web page, go to “Disk Configuration”. Run
“Create Disk Volume”, and select “RAID 0 Striping Disk Volume.”
IEI CONFIDENTIAL
29
