IEI Technology NANO-GM45A Скачать руководство пользователя

Страница: 88 / 128

NANO-GM45A EPIC SBC

Page 76

UDMA5

Ultra DMA mode 5 selected with a maximum data transfer

rate of 99.9 MB/s (To use this mode, it is required that an

80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the

S.M.A.R.T

option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel.

S.M.A.R.T

predicts

impending drive failures. The

S.M.A.R.T

BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the

32Bit Data Transfer

BIOS option to enables or disable 32-bit data transfers.

Disabled

Prevents the BIOS from using 32-bit data transfers.

Enabled D

EFAULT

Allows BIOS to use 32-bit data transfers on supported

hard disk drives.

5.3.3 AHCI Configuration

NOTE:

Advanced Host Controller Interface (AHCI) is a new programming

interface for SATA host controllers. AHCI systems do not have

master/slave designation for SATA devices, each device is treated as a

master, and hardware-assisted native command queuing.

Use the

AHCI Settings

menu (

BIOS Menu 6

) to report on the auto-detection of devices

connected to the onboard SATA drive connectors.

Содержание NANO-GM45A

































































































































Результаты поиска

Содержание NANO-GM45A

Отзывы:

Похожие инструкции для NANO-GM45A

Бренды по названию

Популярные бренды

IEI Technology NANO-GM45A, Руководство пользователя

Результаты поиска

Содержание NANO-GM45A

Отзывы:

Похожие инструкции для NANO-GM45A

Бренды по названию

Популярные бренды