IEI Technology NANO-AL, Руководство пользователя

Страница: 69 / 147

NANO-AL EPIC SBC
Page 55
WARNING:
The installation instructions described in this manual should be
carefully followed in order to prevent damage to the NANO-AL,
NANO-AL components and injury to the user.
Before and during the installation please DO the following:

Read the user manual :
o
The user manual provides a complete description of the installation
instructions and configuration options.

Wear an electrostatic discharge cuff (ESD) :
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.

Place on an anti-static pad :
o
When installing or configuring the motherboard, place it on an anti-static
pad. This helps to prevent potential ESD damage.

Turn all power off :
o
Make sure the product is disconnected from all power supplies and that
no electricity is being fed into the system.
Before and during the installation of the NANO-AL, DO NOT:

Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.

Use the product before verifying all the cables and power connectors are
properly connected.

Allow screws to come in contact with the PCB circuit, connector pins, or its
components.