IEI Technology MODAT-335, Руководство пользователя, Страница: 28 / 74

MODAT-335A Field Service Terminal
Page 18
ƒ
Anti-static Discharge
: If a user open the rear panel of the MODAT-335A, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.3 Charging the System
NOTE:
Before using the MODAT-335A for the first time, the battery must be
charged for at least 4 hours. After that, the battery may be charged as
needed.
CAUTION:
The recommended environment temperature when charging the
system is 0
°
C ~ +45
°
C.
To start using the MODAT-335A, the user must charge the MODAT-335A by the power
adapter. To charge the MODAT-335A, please follow the steps below.
Step 1:
Open the protective rubber cover to expose the Mini USB port.
Step 2:
Connect the Mini USB plug of the USB cable to the Mini USB port on the left side
panel of the MODAT-335A (
Figure 3-1
).