IEI Technology LCD-KIT150G Скачать руководство пользователя

Страница: 3 / 126

LCD KIT Series Monitor

Page 3

SAFETY PRECAUTIONS

Prior to installing, moving, and modifying the monitor, make sure the power is

turned off and the power cord is disconnected.

Do not apply voltage levels that exceed the specified voltage range. Doing so will

cause fire or an electrical shock.

Electric shocks can occur if the panel is opened. Do not drop or insert any objects

into the ventilation openings of the monitor.

Only qualified engineers from certified system integrators or VARs are allowed to

make necessary functional modifications to the monitor, e.g., adding a touch

panel. IEI offers the customization service on a pre-order basis.

Designs with stand-alone and fault-tolerant hardware considerations should be

implemented using the series models as a critical alarm or production line control.

If considerable amount of dust, water, or fluids entered the monitor, turn off the

power supply immediately, unplug the power cord, and contact the monitor

vendor.

Explosions may occur with installations in environments where flammable gases

are present.

Fault-tolerant and failsafe designs should be implemented with the use of the

series models on transportation vehicles, ships, safety/security devices, or

medical devices not related to life-support functionalities. Users/integrators should

take the responsibility for implementations with adequate levels of reliability and

safety.

FURTHER PRECAUTIONS

Do not drop the monitor against a hard surface. Doing so will damage the display.

Do not strike or exert excessive force onto the LCD panel.

Touching the LCD panel using a sharp object will damage the LCD panel.

Avoid environments exposed to direct sunlight, dust, or chemical vapors.

The ambient temperature of the installation site should be observed and

controlled to avoid overheating the monitor.

Содержание LCD-KIT150G































































































































Результаты поиска

Содержание LCD-KIT150G

Отзывы:

Похожие инструкции для LCD-KIT150G

Бренды по названию

Популярные бренды

IEI Technology LCD-KIT150G, Руководство пользователя

Результаты поиска

Содержание LCD-KIT150G

Отзывы:

Похожие инструкции для LCD-KIT150G

Бренды по названию

Популярные бренды