background image

 

 

KINO-QM57A Mini-ITX SBC 

Page 53

4.4.3 SO-DIMM Installation 

To install an SO-DIMM, please follow the steps below and refer to 

Figure 4-4

 

Figure 4-4: SO-DIMM Installation   

Step 1: 

Locate the SO-DIMM socket

. Place the board on an anti-static mat. 

Step 2: 

Align the SO-DIMM with the socket

. Align the notch on the memory with the 

notch on the memory socket. 

Step 3: 

Insert the SO-DIMM

. Push the memory in at a 20º angle. (See 

Figure 4-4

Step 4: 

Seat the SO-DIMM

. Gently push downwards and the arms clip into place. (See 

Figure 4-4

Step 0:

 

4.5 Jumper Settings 

 

NOTE:

 

 

A jumper is a metal bridge used to close an 

electrical circuit. It consists of two or three metal 

pins and a small metal clip (often protected by a 

plastic cover) that slides over the pins to connect 

them. To CLOSE/SHORT a jumper means 

connecting the pins of the jumper with the plastic 

clip and to OPEN a jumper means removing the 

plastic clip from a jumper.

 

 

 

Figure 4-5: Jumper Locations 

Содержание KINO-QM57A

































































































































































Отзывы: