manualshive.com logo in svg

IEI Technology KINO-AH612, Руководство пользователя

Поделиться
Скачать
IEI Technology KINO-AH612 Скачать руководство пользователя страница 52

 

 

KINO-AH612 

Page 41

Before and during the installation of the KINO-AH612 

DO NOT: 

ƒ

 

Remove any of the stickers on the PCB board. These stickers are required for 

warranty validation. 

ƒ

 

Use the product before verifying all the cables and power connectors are 

properly connected. 

ƒ

 

Allow screws to come in contact with the PCB circuit, connector pins, or its 

components. 

4.3 Basic Installation 

 WARNING: 

A CPU should never be turned on without the specified cooling kit 

being installed. If the cooling kit (heat sink and fan) is not properly 

installed and the system turned on, permanent damage to the CPU, 

KINO-AH612 and other electronic components attached to the system 

may be incurred. Running a CPU without a cooling kit may also result 

in injury to the user. 

The CPU, CPU cooling kit and DIMM are the most critical components of the KINO-AH612. 

If one of these component is not installed the KINO-AH612 cannot run. 

4.3.1 Socket LGA1155 CPU Installation 

 WARNING: 

CPUs are expensive and sensitive components. When installing the 

CPU please be careful not to damage it in anyway. Make sure the CPU 

is installed properly and ensure the correct cooling kit is properly 

installed. 

Do NOT touch the pins at the bottom of the CPU. When handling the 

CPU, only hold it on the sides. 

Содержание KINO-AH612






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды