IEI Technology IVS-300-BT-J1/4G, Руководство пользователя

Страница: 89 / 110

IVS-300 Embedded System
Page 75
5.3 Component Replacement Procedure
WARNING!
Users are not advised to attempt to repair or replace any internal or
external components of the IVS-300 embedded system other than
those listed below. If any other components fail or need replacement,
contact the IEI reseller or vendor you purchased the IVS-300 from or
contact an IEI sales representative directly. To contact an IEI sales
representative, please send an email to sales@ieiworld.com .
The embedded system components listed below can all be replaced if they fail:

SO-DIMM module

PCIe Mini card (see Section 3.5 )

WLAN or WWAN module (see Section 3.5.1 )
5.3.1 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the IVS-300. Please make sure the purchased SO-DIMM complies with
the memory specifications of the IVS-300.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1: Access the front side of the main board. See Section 3.4.
Step 2: Locate the SO-DIMMs on the motherboard.