IEI Technology IVS-100-BT Скачать руководство пользователя страница 27

Страница: 27 / 120

IVS-100-BT Advanced Auto Data Server

Page 15

3.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the maintenance of the

IVS-100-BT may result in permanent damage to the IVS-100-BT and

severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the IVS-100-BT. Dry climates are especially susceptible to ESD. It is therefore

critical that whenever the IVS-100-BT is accessed internally, or any other electrical

component is handled, the following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: - Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

: - Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: - When configuring the IVS-100-BT, place it on an

anti-static pad. This reduces the possibility of ESD damaging the IVS-100-BT.

Only handle the edges of the PCB

: - When handling the PCB, hold the PCB

by the edges.

3.2 Installation Precautions

When installing the IVS-100-BT, please follow the precautions listed below:

Power turned off

: When installing the IVS-100-BT, make sure the power is

off. Failing to turn off the power may cause severe injury to the body and/or

damage to the system.

Certified Engineers

: Only certified engineers should install and modify

onboard functionalities.

Anti-static Discharge

: If a user open the bottom panel of the IVS-100-BT, to

configure the jumpers or plug in added peripheral devices, ground themselves

first and wear an anti-static wristband.

Содержание IVS-100-BT

























































































































Результаты поиска

Содержание IVS-100-BT

Отзывы:

IEI Technology IVS-100-BT, Руководство пользователя, Страница: 27 / 120

Результаты поиска

Содержание IVS-100-BT

Отзывы: