IEI Technology IVS-100-BT Скачать руководство пользователя страница 14

Страница: 14 / 120

IVS-100-BT Advanced Auto Data Server

Page 2

1.1 Overview

Figure 1-1: IVS-100-BT Advanced Auto Data Server

The IVS-100-BT is an embedded system designed for in-car use. At the heart of the

system is the Intel® Atom™ E3826 processor, offering low power in a powerful package.

The IVS-100-BT supports HDMI and VGA display outputs and 802.11b/g/n wireless

networking capability. It also offers Global Position System (GPS), On-Board Diagnostic

System (OBD) technology and 3G mobile telecommunications network connection

(optional).

Other peripherals include four USB 3.0 ports, two GbE ports, one RS-422/485 and GPIO

connector, two RS-232 COM ports, optional video capture port and audio line-in and

line-out jacks.

1.2 Model Variations

The model variations of the IVS-100-BT are listed below.

Model

CPU

2 GB DDR3L Memory Preinstalled

IVS-100-BT-E3/2G-R10

1.46 GHz Intel® Atom™ E3826 Yes

IVS-100-BT-R10

1.46 GHz Intel® Atom™ E3826 No

Table 1-1: Model Variations

Содержание IVS-100-BT

























































































































Результаты поиска

Содержание IVS-100-BT

Отзывы:

IEI Technology IVS-100-BT, Руководство пользователя, Страница: 14 / 120

Результаты поиска

Содержание IVS-100-BT

Отзывы: