IEI Technology iSignager 500A, Руководство пользователя

Страница: 23 / 64

iSignager 500A
Page 13
Step 1: Format the HDD as FAT 32 format. Connect the HDD to a computer with an
IDE-USB cable and format the HDD.
Step 2: Generate a playable disk to the HDD. Follow the steps described in Generate
a Playable Disk Section to copy the player settings and the sequence to the
HDD. Disconnect the HDD from the computer.
Step 3: Remove the top cover of the iSignager 500A. The top cover is secured to the
chassis with three retention screws on the rear panel. Remove the three
retention screws, slide the top cover and lift the top cover off the iSignager 500A.
Step 4: Remove the HDD bracket. The HDD bracket is secured to the iSignager 500A
with four retention screws on the backside of the top cover. Remove the four
retention screws and lift the bracket off the iSignager 500A top cover.