IEI Technology iSignager 300WL, Руководство пользователя

Страница: 12 / 39

iSignager-300/300WL
Page 4
ƒ
RS-232 serial connector : This port can be connected to three COM ports
(COM 0, 3, 4). If a general RS-232 cable is used, it only connects to COM 0
for displaying player debug message (Please refer to Appendix A.1 ). For
other COM port connection (COM3 and COM4), a special cable is needed.
ƒ
VGA connector : Connects to VGA connector of the display device.
ƒ
RJ-45 Ethernet connector : Supports 10/100M BASE-T LAN for updating
display content, firmware and player settings via network interface.
ƒ
SD card slot : For installing SD card with media content created in the
iSignager AdExpress for Frame.
ƒ
USB connector : For installing USB flash drive to update display content,
firmware and player settings.
ƒ
Audio out jack : Connects to audio input connector of the display device.
ƒ
Reset button : Resets the iSignager player.
ƒ
Antenna connector (iSignager-300WL only): Connects to an antenna for
wireless LAN connection.
Figure 1-2 shows the rear panel of the iSignager-300 digital signage display.
Figure 1-2: iSignager-300 Rear Panel View