IEI Technology IS-453S-8G, Руководство пользователя

Страница: 43 / 57

IS-453S-8G Industrial NAS
Page 35
Step 2:
Pull the retention clips on each side so that the module tilts up for easy removal.
Remove installed memory modules (
861
Figure 4-2
).
Figure 4-2: Pull the Retention Clips on Each Side
Step 3:
Slide the memory module to the slot at a 45-degree angle (approximately) and
press the memory module down until it clips into place. Ensure the memory
module sits properly with the clips in place.
Figure 4-3: SO-DIMM Installation