IEI Technology IS-453S-8G, Руководство пользователя

Страница: 41 / 57

IS-453S-8G Industrial NAS
Page 33
WARNING:
The following instructions should only be performed by an authorized
and trained technician.
Before starting, please ensure that you turn off the NAS, disconnect the
power adaptor, network cable(s), and also remove any other
device/cable that is attached to the NAS.
Take Anti-Static precautions whenever maintenance is being carried
out on the system components. Failure to take anti-static precautions
can cause permanent system damage. For more details on anti-static
precautions, please refer to
Section
861
3.1
.
4.1 Component Replacement Procedure
WARNING!
Users are not advised to attempt to repair or replace any internal or
external components of the IS-453S-8G industrial NAS other than
those listed below. If any other components fail or need replacement,
contact the IEI reseller or vendor you purchased the IS-453S-8G from
or contact an IEI sales representative directly. To contact an IEI sales
representative, please send an email to
327
sales@ieiworld.com .
The industrial NAS components listed below can all be replaced if they fail:
 SO-DIMM module
 Internal hard disk drive (see
Section
861
3.4
)