IEI Technology IOWA-8522, Руководство пользователя

Страница: 97 / 244

IOWA-8522 Motherboard
Page 77
person installing the motherboard.
5.2.1 Installation Notices
WARNING:
The installation instructions described in this manual should be
carefully followed in order to prevent damage to the IOWA-8522 and
injury to the user.
Before and during the installation please DO the following:
Read the user manual :
o
The user manual provides a complete description of the IOWA-8522
installation instructions and configuration options.
Wear an electrostatic discharge cuff (ESD) :
o
Electronic components are easily damaged by ESD. Wearing an ESD
cuff removes ESD from the body and helps prevent ESD damage.
Place the IOWA-8522 on an antistatic pad :
o
When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.
Turn off all power to the IOWA-8522:
o
When working with the IOWA-8522, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the
system.
Before and during the installation of the IOWA-8522 DO NOT do the following:
DO NOT remove any of the stickers on the PCB board. These stickers are
required for warranty validation.
DO NOT use the product before verifying all the cables and power
connectors are properly connected.
DO NOT allow screws to come in contact with the PCB circuit, connector
pins, or its components.