IEI Technology IOWA-8522 Скачать руководство пользователя страница 114

Страница: 114 / 244

IOWA-8522 Motherboard

Page 94

SATA drive power cable

Table 5-6: IEI Provided Cables

5.6.1 Audio Kit Installation (Optional)

NOTE:

This is an optional item that must be ordered separately. For further

information please contact the nearest IOWA-8522 distributor, reseller

or vendor or contact an iEi sales representative directly. Send any

queries to

[email protected]

The 5.1 channel audio kit connects to the 9-pin audio connector on the IOWA-8522.

Jumpers on the audio kit adjust the function of some of the audio jacks. Please refer to

the audio kit user’s manual for details.

The 5.1 channel audio kit consists of three audio jacks. The microphone audio jack

connects to a microphone, the line out audio jack is used for audio output to an external

amplifier or speakers and the line in audio jack is for recording from a line audio source.

Step 1:

Connect the audio kit cable.

The audio kit is shipped with a cable that

connects the audio kit to the IOWA-8522. Connect the cable to the connector

on the back of the audio kit. Make sure the pins are properly aligned (i.e. pin 1

connects to pin 1).

Step 2:

Locate the audio connector

. The location of the 9-pin audio connector is

shown in

Chapter 3

Step 3:

Align pin 1

. Align pin 1 on the onboard connector with pin 1 on the audio kit

cable connector. Pin 1 on the audio kit cable connector is indicated with a white

dot.

Содержание IOWA-8522





















































































































































































































































Результаты поиска

Содержание IOWA-8522

Отзывы:

Бренды по названию

Популярные бренды

IEI Technology IOWA-8522, Руководство пользователя

Результаты поиска

Содержание IOWA-8522

Отзывы:

Бренды по названию

Популярные бренды