IEI Technology IOVU-430S Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 47

IEI Technology IOVU-430S Скачать руководство пользователя страница 23

IOVU-430S Panel PC

Page 15

3.1 Installation Precautions

During installation, be aware of the precautions below:



Read the user manual

: The user manual provides a complete description of

the IOVU-430S, installation instructions and configuration options.



DANGER! Disconnect Power

: Power to the IOVU-430S must be

disconnected during the installation process, or before any attempt is made to

access the rear panel. Electric shock and personal injury might occur if the

rear panel of the IOVU-430S is opened while the power cord is still connected

to an electrical outlet.



Qualified Personnel

: The IOVU-430S must be installed and operated only by

trained and qualified personnel. Maintenance, upgrades, or repairs may only

be carried out by qualified personnel who are familiar with the associated

dangers.



Grounding

: The IOVU-430S should be properly grounded. The voltage feeds

must not be overloaded. Adjust the cabling and provide external overcharge

protection per the electrical values indicated on the label attached to the back

of the IOVU-430S.

3.2 microSD Card Installation

The IOVU-430S supports a microSD card. To install a microSD card, insert the microSD

card into the slot as shown in

.

Figure 3-1: microSD Card Installation

«
...
21
22
23
24
25
...
»

Содержание IOVU-430S
















































Отзывы:

Нет отзывов