IEI Technology IOVU-07F-AD, Руководство пользователя

Страница: 28 / 85

IOVU-07F-AD RISC-based Panel PC
Page 19
Figure 3-4: Wall-mounting Bracket
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the real panel of the IOVU-07F-AD and tighten until the
screw shank is secured against the rear panel (
Figure 3-5
).
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (
Figure 3-5
).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.