IEI Technology IMBA-X9654 Скачать руководство пользователя страница 37

Страница: 37 / 266

IMBA-X9654 ATX Motherboard

Page 19

chip-to-chip connection interface to Intel ICH8

2GB/s (1GB/s in each direction) bus speed

32-bit downstream address

100 MHz reference clock (shared with PCI Express Graphics Attach)

APIC and MSI interrupt messaging support

Message Signaled Interrupt (MSI) messages

SMI, SCI and SERR error indication

DMA, floppy drive, and LPC bus master

2.5 Intel

ICH8DO Southbridge Chipset

2.5.1 Intel

ICH8DO Overview

The Intel® ICH8DO southbridge chipset is connected to the Intel® Q965 northbridge

GMCH through the chip-to-chip Direct Media Interface (DMI). Some of the features of the

Intel® ICH8DO are listed below.

Complies with PCI Express Base Specification, Revision 1.1

Complies with PCI Local Bus Specification, Revision 2.3 and supports 33MHz

PCI operations

Supports ACPI Power Management Logic

Contains:

Enhanced DMA controller

Interrupt controller

Timer functions

Integrated SATA host controller with DMA operations and AHCI support

interfaced to six SATA connectors on the IMBA-X9654

Supports the eight USB 2.0 devices on the IMBA-X9654 with five UHCI

controllers and two EHCI controllers

Integrated 10/100/1000 GbE MAC with System Defense

Complies with System Management Bus (SMBus) Specification, Version 2.0

Supports Intel High Definition Audio

Supports Intel® Matrix Storage Technology

Supports Intel® Active Management Technology (ICH8DO only)

Low Pin Count (LPC) interface

Firmware Hub (FWH) interface support

Содержание IMBA-X9654











































































































































































































































































Результаты поиска

Содержание IMBA-X9654

Отзывы:

IEI Technology IMBA-X9654, Руководство пользователя, Страница: 37 / 266

Результаты поиска

Содержание IMBA-X9654

Отзывы: