IEI Technology IMBA-X9654 Скачать руководство пользователя страница 198

Страница: 198 / 266

IMBA-X9654 ATX Motherboard

Page 180

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Intel® Chipset driver

VGA driver (Intel® Graphics Media Accelerator Driver)

Audio driver (Realtek HD Audio Driver (ALC883))

SATA driver (Intel® Matrix Storage Manager)

IDE controller (IT8211)

LAN Driver

Installation instructions are given below.

7.2 Driver CD Auto-run

All the drivers for the IMBA-X9654 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the system does not initiate the "autorun" program when the CD is

inserted, click the

Start

button, select

Run

, then type

X:\autorun.exe

(where

X:\

is the system CD drive) to access the IEI Driver CD main

menu.

Содержание IMBA-X9654











































































































































































































































































Результаты поиска

Содержание IMBA-X9654

Отзывы:

IEI Technology IMBA-X9654, Руководство пользователя, Страница: 198 / 266

Результаты поиска

Содержание IMBA-X9654

Отзывы: