IEI Technology IMBA-H110, Руководство пользователя

Страница: 83 / 152

IMBA-H110 ATX Motherboard
Page 69
Setting Description
1-2 ATX power mode (default)
2-3 AT power mode
Table 4-1: AT/ATX Power Mode Switch Settings
4.8.2 Clear CMOS Button
To reset the BIOS, remove the on-board battery and press the clear CMOS button for
three seconds or more. The clear CMOS button location is shown in
Figure 4-14 .
Figure 4-14: Clear CMOS Button Location
4.8.3 DVI/CRT Selection Switch
The DVI-I connector on the rear panel supports both digital and analog signals. To connect
a CRT monitor to the DVI-I connector, the user has to set the DVI/CRT selection switch to
CRT position. Refer to
Figure 4-15
and
Table 4-2
for the switch location and settings.
Setting Description
1-2 DVI monitor (Default)
2-3 CRT monitor
Table 4-2: DVI/CRT Selection Switch Settings