IEI Technology IMBA-H110, Руководство пользователя

Страница: 78 / 152

IMBA-H110 ATX Motherboard
Page 64
4.5 DIMM Installation
To install a DIMM, please follow the steps below and refer to Figure 4-6 .
Figure 4-6: DIMM Installation
Step 1: Open the DIMM socket handles . Open the two handles outwards as far as
they can. See Figure 4-6 .
Step 2: Align the DIMM with the socket
. Align the DIMM so the notch on the memory
lines up with the notch on the memory socket. See Figure 4-6 .
Step 3: Insert the DIMM . Once aligned, press down until the DIMM is properly seated.
Clip the two handles into place. See Figure 4-6 .
Step 4: To remove a DIMM, push both handles outward. The memory module is ejected
by a mechanism in the socket.
Step 0: