Chapter 3 BIOS Setup
34
User’s Manual
Onboard Parallel Port 1: This item allows you to determine onboard parallel port controller I/O address
setting. The settings are Disabled, 3BC/IRD7, 378/IRQ7, and 278/IRQ5.
Parallel Port Mode: There are four options SPP (default), EPP, ECP and ECP/EPP. Change the mode from
Normal to the enhanced mode only if your peripheral device can support it. When it is set to ECP mode, the
printer port always uses DMA3.
EPP Mode Select: The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard
parallel port with the EPP function, the following message will be displayed in the screen: "EPP Mode Select."
At this time either EPP 1.7 spec or EPP 1.9 spec can be chosen.
ECP Mode Use DMA: Select a DMA channel for the parallel port for use during ECP mode. The settings are
3 and 1.
Game Port Address: This will determine which Address the Game Port will use.
Onboard Serial Port 3: The choices: Disabled (Default), 3F8H, 2F8H, 3E8H, and 2E8H.
Serial Port 3 Use IRQ: The choices: IRQ10, IRQ11, IRQ4, IRQ3.
Onboard Serial Port 4: The choices: Disabled (Default), 3F8H, 2F8H, 3E8H, and 2E8H.
Serial Port 4 Use IRQ: The choices: IRQ10, IRQ11, IRQ4, IRQ3.
Содержание IMB-X63 Series
Страница 4: ......
Страница 8: ...Chapter 1 Introduction 4 User s Manual 1 5 Board Layout ...