IEI Technology IMB-8550 Скачать руководство пользователя страница 73

Страница: 73 / 166

IMB-8550

3.3 Installation

CPU Installation

WARNING!

Please note that the installation instructions described in this manual

should be carefully followed in order to avoid damage to the board

components.

Static-free installation environment: The IMB-8550 must be installed in a

static-free environment to minimize the possibility of electrostatic

discharge (ESD) damage. Use of an anti-static work pad or a grounded

anti-static wrist strap is strongly recommended. To avoid damaging the

board components due to static electricity, never place your board

directly on a surface that is not static-free, e.g., a carpet.

Always hold components by the edges and do not touch the ICs and

connector pins.

Do not remove a component from its anti-static bag before installation.

Before you proceed with the installation process, check the CPU surface

and check for bent pins on the socket.

While installing the CPU, do not use force, serious damage to the CPU or

CPU socket might occur.

To install Intel 479-pin CPU onto your motherboard, follow the steps below:

Step 1.

Check if the retention screw on your CPU socket (mPGA479M) is turned to the unlock

position. The CPU socket should arrive in the unlock condition; however, it is better

you check the retention screw before you proceed with the rest of the procedure.

The CPU installation process requires a flathead screwdriver to complete.

3-11

Содержание IMB-8550







































































































































































Результаты поиска

Содержание IMB-8550

Отзывы:

Похожие инструкции для IMB-8550

Бренды по названию

Популярные бренды

IEI Technology IMB-8550, Руководство пользователя

Результаты поиска

Содержание IMB-8550

Отзывы:

Похожие инструкции для IMB-8550

Бренды по названию

Популярные бренды