IEI Technology IMB-8550 Скачать руководство пользователя страница 64

Страница: 64 / 166

IMB-8550 User Manual

3.1

Considerations Prior to Installation

Preparing Your Motherboard

The Motherboard contains numerous delicate electronic circuits and components, which can

become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please

follow the instructions below:

1. Please turn off the computer and unplug its power cord.

2. When handling the motherboard, avoid touching any metal leads or connectors.

3. It is best to wear an electrostatic discharge (ESD) cuff when handling electronic components

(CPU, RAM).

4. Prior to installing the electronic components, please have these items on top of an antistatic

pad or within an electrostatic shielding container.

Please verify that the power supply is switched off before unplugging the power supply

connector from the motherboard.

Installation Notices

1. Prior to installation, please do not remove the stickers on the PCB board. These stickers are

required for warranty validation.

2. Prior to the installation of the Motherboard or any hardware, please first carefully read the

information in the provided manual.

3. Before using the product, please verify that all cables and power connectors are connected.

4. To prevent damage to the PCB board, please do not allow screws to come in contact with the

PCB circuit, connector pins, or its components.

5. Please make sure there are no leftover screws or metal components placed on the

motherboard or within the computer casing.

6. Please do not place the computer system on an uneven surface.

7. Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certified computer technician.

3-2

IEI

Technology, Corp.

Содержание IMB-8550







































































































































































Результаты поиска

Содержание IMB-8550

Отзывы:

Похожие инструкции для IMB-8550

Бренды по названию

Популярные бренды

IEI Technology IMB-8550, Руководство пользователя

Результаты поиска

Содержание IMB-8550

Отзывы:

Похожие инструкции для IMB-8550

Бренды по названию

Популярные бренды