IEI Technology IEM-945GSE Скачать руководство пользователя страница 28

Страница: 28 / 148

IEM-945GSE ETX 3.0 Module

Page 16

2.5.7 SATA Controller

The integrated SATA controller on the Southbridge supports up to two SATA drives with

independent DMA operations. The SATA connectors are located on the IEM-945GSE and

not interfaced through the ETX 3.0 connectors. SATA controller specifications are listed

below.

Supports two SATA drives

Supports 1.5 Gb/s data transfer speeds

Supports Serial ATA Specification, Revision 1.0a

2.5.8 SPI Bus

The Serial Peripheral Interface is a short distance serial bus for communication with other

devices on the motherboard. The SPI interface from the board is interfaced to the items

below:

SPI

BIOS.

2.5.9 USB Controller

Up to eight high-speed, full-speed or low-speed USB devices are supported by the Intel®

ICH7M on the IEM-945GSE. High-speed USB 2.0, with data transfers of up to 480 MB/s,

is enabled with the Intel® ICH7M integrated Enhanced Host Controller Interface (EHCI)

compliant host controller. USB full-speed and low-speed signaling is supported by the

Intel® ICH7M integrated Universal Host Controller Interface (UHCI) controllers.

2.6 Environmental and Power Specifications

2.6.1 System Monitoring

The IEM-945GSE monitors the following temperatures:

CPU

temperature

System

temperature

On-chip

temperature

The IEM-945GSE monitors the following fan speeds:

Содержание IEM-945GSE





















































































































































Результаты поиска

Содержание IEM-945GSE

Отзывы:

Похожие инструкции для IEM-945GSE

Бренды по названию

Популярные бренды

IEI Technology IEM-945GSE, Руководство пользователя

Результаты поиска

Содержание IEM-945GSE

Отзывы:

Похожие инструкции для IEM-945GSE

Бренды по названию

Популярные бренды