IEI Technology IDS-330-ADL-P Series, Руководство пользователя, Страница: 92 / 119

IDS-330-ADL-P
Page 80
➔ Auto Power Button Status [Disable (ATX)]
Use the Auto Power Button Status BIOS option to show the power mode state. Use the
J_ATX_AT1 to switch the AT/ATX power mode.
➔
Enabled (AT) The system power mode is AT.
➔
Disabled (ATX) The system power mode is ATX.
➔ Restore AC Power Loss [Last State]
Use the Restore AC Power Loss BIOS option to specify what state the system returns to
if there is a sudden loss of power to the system when the power mode is ATX.
➔
Power Off The system remains turned off
➔
Power On The system turns on
➔
Last State D
EFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
➔ Power Saving Function(ERP) [Disabled]
Use the Power Saving Function(ERP) BIOS option to enable or disable the power
saving function.
➔
Disabled D
EFAULT
Power saving function is disabled.
➔
Enabled Power saving function is enabled. It will reduce power
consumption when the system is off.
➔ USB Power SW1 [+5V DUAL]
Use the USB Power SW1 BIOS option to configure the USB power source for the
corresponding USB connectors (Table 5-2).
➔
+5V DUAL D
EFAULT
Sets the USB power source to +5V dual
➔
+5V Sets the USB power source to +5V