IEI Technology IDS-330-ADL-P Series, Руководство пользователя

Страница: 26 / 119

IDS-330-ADL-P
Page 14
3.2 Cover Removal
Before installing or maintaining the internal components, the cover must be removed from
the IDS-330-ADL-P Series. Follow the steps below to complete the task.
Step 1:
Loosen the 6 screws on the cover.
Step 2:
Take off the cover (Figure 3-1).
Figure 3-1
:
Remove the Cover
3.3 Storage Installation
The IDS-330-ADL-P Series has M.2 Key to support storage. To install an M.2 module,
please follow the steps below.
Step 1:
Locate the M.2 module slot.
Step 2:
Remove the retention screw secured on the motherboard.
Step 3:
Line up the notch on the module with the notch on the slot. Slide the M.2 module
into the socket at an angle of about 20º ( Figure 3-2 )