IEI Technology IDS-310-AL, Руководство пользователя

Страница: 44 / 114

IDS-310-AL Embedded System
Page 30

The bottom surface panel is installed

All peripheral devices (monitor, serial communications devices etc.) are
connected

The power cables are plugged in

The system is securely mounted
3.9.2 Power-on Procedure
To power-on the IDS-310-AL, please follow the steps below.
Step 1:
Connect the power source to the power input jack.
Step 2: Push the power button ( Figure 3-21 ).
Step 3: Once turned on, the power LED indicator should turn on in green. Step 0:
Figure 3-21: Power Button and Power LED
3.10 Reset the System
The reset button enables user to reboot the system when the system is turned on. The
reset button location is shown in
Figure 3-22. Press the reset button t o reboot the
system.
Figure 3-22: Reset Button Location