IEI Technology ICEFIRE-T10A, Руководство пользователя

Страница: 40 / 149

ICEFIRE-T10A Mobile Clinic Assistant
Page 26
3.4 I/O Connectors
3.4.1 LAN Connection
The RJ-45 connectors enable connection to an external network. To connect a LAN cable
with an RJ-45 connector, please follow the instructions below.
Step 1:
Locate the RJ-45 connector on the rear panel. The locations of the USB
connectors are shown in
45
Figure 1-4
in Chapter 1.
Step 2: Open the rubber cover
.
Step 3: Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel. See
45
Figure 3-13.
Figure 3-13: LAN Connection
Step 4: Insert the LAN cable RJ-45 connector.
Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 port.
Step 0:
3.4.2 USB Device Connection
There is one USB 2.0 connector located on the right side of the ICEFIRE-T10A. To
connect a USB 2.0 or USB 1.1 device, please follow the instructions below.
Step 1: Located the USB connector
. The location of the USB connector is shown in
45
Figure 1-5.