IEI Technology IBM-Q670 Скачать руководство пользователя страница 87

Страница: 87 / 184

IMB-Q670 Micro-ATX Motherboard

Page 73

5.1 Introduction

The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to

certain system settings. This chapter outlines the options that can be changed.

NOTE:

Some of the BIOS options may vary throughout the life cycle of the

product and are subject to change without prior notice.

5.1.1 Starting Setup

The UEFI BIOS is activated when the computer is turned on. The setup program can be

activated in one of two ways.

1. Press

the

key as soon as the system is turned on or

2. Press

the

key when the “

Press F2 to enter SETUP

” message appears on

the screen.

If the message disappears before the

key is pressed, restart the computer and try again.

5.1.2 Using Setup

Use the arrow keys to highlight items, press

NTER

to select, use the PageUp and

PageDown keys to change entries, press

for help and press

to quit. Navigation

keys are shown in.

Key

Function

Up arrow

Move to previous item

Down arrow

Move to next item

Left arrow

Move to the item on the left hand side

Right arrow

Move to the item on the right hand side

Increase the numeric value or make changes

Decrease the numeric value or make changes

Содержание IBM-Q670

























































































































































































Результаты поиска

Содержание IBM-Q670

Отзывы:

IEI Technology IBM-Q670, Руководство пользователя, Страница: 87 / 184

Результаты поиска

Содержание IBM-Q670

Отзывы: