IEI Technology IBM-Q670 Скачать руководство пользователя страница 178

Страница: 178 / 184

IMB-Q670 Micro-ATX Motherboard

Page 164

F.1 Introduction

The IMB-Q670 can provide data protection for serial ATA (SATA) disks via the Intel®

Matrix Storage Manager using one of three fault-tolerant RAID levels: RAID 1, 5 or 10.

When using two hard drives, matrix RAID allows RAID 0 and RAID 1 functions to be

combined, where critical files can be stored on RAID 1, and RAID 0 can be used for

non-critical items such as software. RAID 5 and RAID 0 can be combined to provide

higher performance, capacity, and fault tolerance.

CAUTION!

A configured RAID volume (which may consist of multiple hard drives)

appears to an operating system as a contingent storage space. The

operating system will not be able to distinguish the physical disk drives

contained in a RAID configuration.

F.1.1 Precautions

One key benefit a RAID configuration brings is that a single hard drive can fail within a

RAID array without damaging data. With RAID1 array, a failed drive can be replaced and

the RAID configuration restored.

WARNING!

Irrecoverable data loss occurs if a working drive is removed when

trying to remove a failed drive. It is strongly recommended to mark the

physical connections of all SATA disk drives. Drive locations can be

identified by attaching stickers to the drive bays. If a drive member of a

RAID array should fail, the failed drive can then be correctly identified.

Содержание IBM-Q670

























































































































































































Результаты поиска

Содержание IBM-Q670

Отзывы:

IEI Technology IBM-Q670, Руководство пользователя, Страница: 178 / 184

Результаты поиска

Содержание IBM-Q670

Отзывы: