3
When a barcode is decoded successfully, the HTDB-100F/100FM
generates a beep and the decode LED (orange) flashes once. The
decoded barcode data is also displayed in the text editor.
In addition, the behavior of the buzzer and decode LED for a successful
decode can be changed. Please refer to Chapter 4 in the user manual to
set up the indicator mode.
-------------------------------------------------------------------------------------------------
NOTE:
The factory default of supported barcode type includes:
Codabar,
Interleaved 2 of 5, Code 128, Code 93, Code 39, MSI,
UPC/EAN, Data
Matrix and QR Code. To scan the barcodes other than the factory default
settings, please enable the barcode type manually.
-------------------------------------------------------------------------------------------------
Configuring the Handheld Barcode Reader
There are two ways to configure the HTDB-100F/100FM:
1. Scanning the barcode symbols listed in Chapter 4 of the user manual
2. Using the IEI HTDB UTILITY (supported OS: Microsoft® Windows® 7/8.1/10
32/64-bit)
Via the IEI HTDB UTILITY, the user can see the setting parameters of the
barcode reader, configure the supported barcode types, restore all settings to
factory default, check the firmware version and upgrade the device firmware to
the latest version.
For detailed information, please refer to the user manual that can be downloaded
from the IEI website (http://www.ieiworld.com).
----------------------------------------------------------------------------------------------------------
NOTE:
To restore all configuration settings to factory default, please
scan the
Restore Defaults
barcode in
Section 4.1.1
of the user manual, or
click
Setting
Æ
Factory Reset
from the
IEI HTDB UTILITY
----------------------------------------------------------------------------------------------------------
Содержание HTDB-100F
Страница 5: ...4 ICE EN 62471 LED LED LED LED...
