2
Using the Handheld Barcode Reader
1. Connect the RJ-45 connector of the supplied RJ-45 to USB cable to the
RJ-45 port on the HTDB-100F/100FM. Ensure to push the connector to
the end until the user hears a “click”.
2. Connect the USB Standard Type A connector of the cable to the USB
Type A receptacle of a computer.
Once the HTDB-100F/100FM is connected to the computer, a beep
should be generated after about four seconds and the power LED (yellow)
turns on, indicating that the barcode reader is fed with power.
-------------------------------------------------------------------------------------------------
NOTE:
The HTDB-100F/100FM will enter the backup mode if the user keeps
pressing the trigger button and connects the HTDB-100F/100FM to the
computer. To exit the backup mode, please reconnect the RJ-45 to USB cable.
When the HTDB-100F/100FM cannot function normally or be connected
to the IEI HTDB UTILITY, the user can use the backup mode to connect
the HTDB-100F/100FM to the utility and update the device firmware.
Then, the barcode reader can be operated normally. For firmware update
procedures, please refer to Chapter 3 in the user manual.
-------------------------------------------------------------------------------------------------
3. The HTDB-100F/100FM is a plug and play barcode reader that allows the
user to scan barcodes instantly after connecting to a computer.
Open a text editor, such as Notepad or Word, then present a barcode to
the HTDB-100F/100FM and press the trigger button. The
HTDB-100F/100FM projects a green scan line. Please aim the green scan
line to the barcode within the reading distance (refer to Chapter 2 in the
user manual for the reading distance of each barcode type).
Содержание HTDB-100F
Страница 5: ...4 ICE EN 62471 LED LED LED LED...
