IEI Technology HTB-100-HM170, Руководство пользователя

Страница: 45 / 131

HTB-100-HM170 Medical Box PC
Page 31
3.12 AT/ATX Mode Selection
AT or ATX power mode can be used on the HTB-100-HM170. The selection is made
through an AT/ATX switch located on the front panel (
Figure 3-24
).
Figure 3-24: AT/ATX Mode Select Switch Location
3.13 Power-On Procedure
3.13.1 Installation Checklist
WARNING:
Make sure a power supply with the correct input voltage is being fed into
the system. Incorrect voltages applied to the system may cause damage to
the internal electronic components and may also cause injury to the user.
To power on the medical box PC please make sure of the following:
 The top cover is installed
 All peripheral devices (VGA/HDMI monitor, serial communications devices
etc.) are connected
 The power cables are plugged in
 The system is securely mounted